Get Financing
Shipping Estimate
1 - 28 of 106 Listings
Online
On-SiteAll
Cutting Width: 30 ft
Serial Number: AGCM92200BHS01142
Condition: Used
Description: NICE MASSEY FERGUSON 9220 SWATHER - 30' AGCO 5200 DRAPER HEADER - ONLY 903 TOTAL HOURS - CUMMINS ENGINE - SWATH ROLLER INCLUDED - VERY CLEAN AND WE...
Updated: Wednesday, August 19, 2026 12:40 PM
Location: Langdon, North Dakota
Seller: Moore Auctions LLC
Cutting Width: 24 ft
Cutterbar Type: Rigid
Serial Number: AGCM53250FHDW2157
Condition: Used
Stock Number: 16071
Fore/Aft Reel: Yes
Description: Selling a Draper Header.
24' Width.
Setup for a Swather.
Both Draper Belts can move both directions.
Dual Knife Drive.
Hydraulic fore/aft and ...
Updated: Wednesday, August 19, 2026 12:40 PM
Location: Holbrook, Nebraska
Seller: Midwest Equipment Auctions
Serial Number: AGCCFDH00EHD01215
Condition: Used
Description: Agco 9250 Dyna Flex
30' Draper Head
Owner says there is a small tear in one of the draper belts (not shown in photos)
Header trailer does not s...
Updated: Wednesday, August 19, 2026 12:42 PM
Location: Tekamah, Nebraska
Seller: Riverside Auction & Sales, LLC
Number of Rows: 8
Row Spacing: 30 in
Rolls: Standard
Serial Number: 083025372
Condition: Used
Stock Number: W56372
Description: 830 AGCO CORN HEAD
HEAD IS IN GOOD WORKING CONDITION
Updated: Thursday, August 27, 2026 11:46 AM
Location: Pomeroy, Iowa
Seller: Western Iowa Equipment
Number of Rows: 8
Row Spacing: 30 in
Serial Number: 083016095
Condition: Used
Description: 1994 Agco 830 Corn Head, 8 Row, 30" Spacing, Calmer BT Chopper Upgrade Kit, Upgrade All Wear Parts have been Replaced and have less than 1,000 Acre...
Updated: Thursday, August 27, 2026 11:52 AM
Location: Stratford, Iowa
Seller: AgriPlains Auctions
Number of Rows: 8
Row Spacing: 30 in
Serial Number: 083017313
Condition: Used
Description: Agco 830 corn head with poly snouts. This head comes with a Montgomery Ward 546 head carrier.
Updated: Wednesday, September 02, 2026 01:51 PM
Location: Ashley, Illinois
Seller: Mollett Auction Service LLC
Cutting Width: 35 ft
Cutterbar Type: Flex
Auto Contour: Yes
Air Reel: Yes
Serial Number: AGCR92500CHD01160
Condition: Used
Description: 2011 Draper head, air reel 3 years old, 1000 acre on belt, sickle and guards. Call Renzie 810..404..8095.
Header trailer will come with header. ...
Updated: Friday, September 27, 2024 07:23 PM
Location: Port Sanilac, Michigan
Seller: Mid Iowa Auction Company
Number of Rows: 8
Row Spacing: 30 in
Rolls: Standard
Serial Number: HT27146
Condition: Used
End Row Augers: Yes
Description: 2008 agco 3000 8 row 30" poly head single point hookup patriot augers came off gleaner s67 combine trailer not included
Updated: Friday, September 27, 2024 06:20 PM
Location: Waukon, Iowa
Seller: Reiser Implement, Inc
Cutting Width: 30 ft
Cutterbar Type: Rigid
Serial Number: 30F-HK84403
Condition: Used
Gathering Type: Auger
Description: AGCO CORP 800 SERIES FLEX HEAD
-2001
-Lateral tilt
-Flex
-30 Feet
-Please note the trailer will NOT sell with the head.
-Located in Regent ND...
Updated: Wednesday, October 02, 2024 01:05 PM
Location: Regent, North Dakota
Seller: Elting Auction Co.
Cutting Width: 25 ft
Serial Number: UNKNOWN
Condition: Used
Description: Agco 500 20’ grain platform. We did not run it but it looks to be in good shape. All chains, guards, sections, and fingers are in good shape. No ho...
Updated: Wednesday, October 09, 2024 12:39 PM
Location: Perryville, Missouri
Seller: T Squared Equipment LLC
Cutting Width: 25 ft
Cutterbar Type: Flex
Serial Number: 2581209F
Condition: Used
Gathering Type: Auger
Description: AGCO 9850 25ft flex head, looks like it fits a Gleaner combine, comes with driveline. Located in Auburn Kansas we will help load on a trailer
Updated: Wednesday, October 09, 2024 12:40 PM
Location: Carbondale, Kansas
Seller: Garrett Equipment LLC
Cutting Width: 20 ft
Serial Number: 20MJ84131F
Condition: Used
Description: AGCO 9850 Platform Head, 20'. Converted to single point, Gleaner Style Hookup. Has not been used for several years, was working fine when last used.
Updated: Wednesday, October 09, 2024 12:41 PM
Location: Versailles, Missouri
Seller: Kilmer Farm Equipment
Number of Rows: 8
Row Spacing: 30 in
Serial Number: UNKNOWN
Condition: Used
Description: Agco 830 corn head. 8 row 30” spacing, didn’t run header but looks to be in good usable shape. Chains all look good. Please call Dylan with any que...
Updated: Wednesday, October 09, 2024 12:59 PM
Location: Perryville, Missouri
Seller: T Squared Equipment LLC
Cutting Width: 20 ft
Cutterbar Type: Flex
Serial Number: 2083106F
Condition: Used
Fore/Aft Reel: Yes
Poly Skid Shoes: Yes
Description: AgCo 800 head works as it should. Picked about 400 acres a year, good shape and was put away in working order. Sells with the head cart as well. Lo...
Updated: Wednesday, October 16, 2024 12:20 PM
Location: Malta, Illinois
Seller: Almburg Equipment Auctions
Cutting Width: 30 ft
Cutterbar Type: Flex
Serial Number: 3042137F
Condition: Used
Auto Reel Speed Control: Yes
Poly Skid Shoes: Yes
Description: Agco Gleaner 8000 Flex Header, 30’ Cutting Width, Fore/Aft Adjustment, Poly Fingers, Hydraulic Drive Reel, Shaft Driven, Poly Skids, Easy Cut Cutte...
Updated: Wednesday, November 13, 2024 12:18 PM
Location: Arlington, Nebraska
Cutting Width: 20 ft
Cutterbar Type: Flex
Serial Number: AGCR8220TDHW08173
Condition: Used
Gathering Type: Auger
Reel Type: Pick Up
Description: AGCO FLEX PLATFORM 8200 FLEX
-20 FEET
-Fingered Reel
-This part of a complete farmer retirement Auction. Located on the farm near Plymouth, NE ...
Updated: Wednesday, December 11, 2024 02:55 PM
Location: Plymouth, Nebraska
Seller: Elting Auction Co.
Serial Number: AGCW82220BH222165
Condition: Used
Stock Number: 15294
Folding: Yes
Number of Acres: 16,000 ac
Description: 12row, 30in spacing, wing fold, vacuum metering system,
3.0 bushel hopper, all bearing replaced on blades and
gauge wheels
Updated: Wednesday, December 11, 2024 03:01 PM
Location: Ellsworth, Kansas
Seller: Carrico Implement
Number of Rows: 8
Row Spacing: 30 in
Rolls: Standard
Serial Number: AGCR830TOEHCH1314
Condition: Used
Chopping Capabillity: Non Chopping
Description: AGCO 3000 CORN HEAD
-8R/30"
-Stored inside when not in the field.
-Note the trailer will NOT sell with the head.
-This part of a complete farme...
Updated: Wednesday, December 11, 2024 03:59 PM
Location: Plymouth, Nebraska
Seller: Elting Auction Co.
Lot # 12198
2004 AGCO 8000
Platform Headers
Auction Ended:Thu, Dec 19, 2024 01:45 PM (CST)
Cutting Width: 25 ft
Cutterbar Type: Flex
Air Reel: Yes
Serial Number: 25FRHN84303
Condition: Used
Gathering Type: Auger
Description: 2004 8000
Gleaner Agco 25 foot bean head platform. Crary air reel. Single point hookup and set up with lateral tilt. Was run on a 2004 R75. New si...
Updated: Thursday, December 19, 2024 02:01 PM
Location: Monticello, Iowa
Seller: Iverson Auctions, LLC
Cutting Width: 35 ft
Cutterbar Type: Flex
Serial Number: AGGR92500BHD01469
Condition: Used
Stock Number: E00005963
Gathering Type: Draper
Description: 2011 AGCO 9250 35' draper head with approx 5,500 acres total now. New belts 2 years ago, SCH sickle knives. Single point hookup. Coming off of R76...
Updated: Monday, December 30, 2024 03:04 PM
Location: Vincennes, Indiana
Serial Number: 083025293
Condition: Used
Description: Agco 500 20’ grain platform. We did not run it but it looks to be in good shape. All chains, guards, sections, and fingers are in good shape. No ho...
Updated: Wednesday, January 15, 2025 11:36 AM
Location: Perryville, Missouri
Seller: T Squared Equipment LLC
Serial Number: 2542736F
Condition: Used
Description: Agco 830 corn head. 8 row 30” spacing, didn’t run header but looks to be in good usable shape. Chains all look good. Please call Dylan with any que...
Updated: Wednesday, January 15, 2025 11:50 AM
Location: Perryville, Missouri
Seller: T Squared Equipment LLC
Cutting Width: 30 ft
Cutterbar Type: Flex
Air Reel: Yes
Serial Number: 30FRHP84226
Condition: Used
Gathering Type: Auger
Description: Agco Gleaner 8000 30 ft. flex header, (The header trailer is NOT included, it is selling as a different lot #), Crary air reel, selling as is,...
Updated: Wednesday, February 05, 2025 11:43 AM
Location: Durham, Kansas
Seller: G&R Implement LLC
Cutting Width: 25 ft
Cutterbar Type: Flex
Serial Number: 2546064F
Condition: Used
Stock Number: 12993
Fore/Aft Reel: Yes
Description: Selling a Flex Header.
25' width.
Pickup reel.
Hydraulic Raise/Lower.
Hydraulic Fore/Aft.
Header has been sitting for a few years.
Worked whe...
Updated: Wednesday, February 26, 2025 02:06 PM
Location: Eustis, Nebraska
Seller: Midwest Equipment Auctions
Serial Number: 2433229G
Condition: Used
Description: AGCO Header, Model# Unknown, Serial # 2433229G
Updated: Wednesday, March 19, 2025 02:46 PM
Location: Davidson, Oklahoma
Seller: Blue River Auctions & Appraisals
Serial Number: 30F-HM84384
Condition: Used
Description: AGCO 8000, 30' Flex Head, Serial # 30F-HM84384
If you have any questions or wish to make an appointment for an inspection, please email or call Bl...
Updated: Wednesday, March 19, 2025 02:47 PM
Location: Davidson, Oklahoma
Seller: Blue River Auctions & Appraisals
Cutting Width: 15 ft
Serial Number: 1346369P
Condition: Used
Description: AGCO 400 15' header
This unit was not operated during the day of inspection and is unknown as to the operational condition of the unit. This uni...
Updated: Wednesday, April 23, 2025 12:29 PM
Location: Hankinson, North Dakota
Seller: Silverline Supply LLC
Cutting Width: 26 ft
Cutterbar Type: Rigid
Serial Number: 2744743G
Condition: Used
Stock Number: 1005-BF-AT
Warning Lights Work: Yes
Description: 1994 27FT Gleaner/Header with upgraded J.E. Love Reel WITH Header FIELD CART (FIELD ONLY) Header was used for seed crop such as Spelt, Veg,Peas and...
Updated: Wednesday, April 30, 2025 02:27 PM
Location: Bend, Oregon
Seller: Western Auction Solutions