2023 HAMM HD+120IVO

2023

1,055

WGH0H274PHAA00577

Used

Accurate / Verified

Unit # 306

Operable

2023 HAMM HD+ 120i VO TANDEM VIBRATORY/OSCILLATORY ROLLER – 1,055 HOURS – ONE OWNER – DEALERSHIP MAINTAINED – FULLY OPERATIONAL EQUIPMENT INFORMATION YEAR: 2023 MAKE: HAMM MODEL: HD+ 120i VO UNIT #: 306 SERIAL NUMBER: WGH0H274PHAA00577 HOURS: 1,055 VERIFIED OWNERSHIP: ONE OWNER MAINTENANCE: LOCAL DEALERSHIP MAINTAINED ENGINE: DEUTZ TCD 4.1 L4 TURBO DIESEL ENGINE HORSEPOWER: 154 HP (115 kW) ENGINE SERIAL NUMBER: 13010567 EPA ENGINE FAMILY: PDZXL04.1056 EMISSIONS: EPA TIER 4 FINAL / EU STAGE V EXHAUST AFTERTREATMENT: DOC / DPF / SCR OPERATING WEIGHT: 28,406 LBS (PREVIOUSLY PROVIDED SPECIFICATION) EQUIPMENT DESCRIPTION Up for auction is a 2023 HAMM HD+ 120i VO Tandem Vibratory/Oscillatory Roller, Unit #306, showing 1,055 verified operating hours. This is a ONE-OWNER machine that has been serviced and maintained by the local dealership. The seller reports that the machine is FULLY OPERATIONAL. Powered by a DEUTZ TCD 4.1 L4 turbocharged diesel engine rated at 154 horsepower, this machine features EPA Tier 4 Final emissions compliance with DOC, DPF, and SCR exhaust aftertreatment systems. The HAMM HD+ 120i VO is a heavy-duty tandem steel drum roller designed for commercial asphalt paving and compaction applications. The machine features a vibratory front drum and an oscillatory rear drum, providing effective compaction while reducing vibration transmitted to surrounding structures and previously compacted surfaces. The roller is equipped with articulated steering, hydrostatic drive, HAMMTRONIC electronic machine management, an open ROPS operator station with overhead canopy, and a water spray system serving both drums. EQUIPMENT FEATURES & SPECIFICATIONS DEUTZ TCD 4.1 L4 Turbo Diesel Engine – 154 HP EPA Tier 4 Final / EU Stage V Emissions DOC / DPF / SCR Exhaust Aftertreatment 1,055 Verified Operating Hours One Owner Local Dealership Maintained Fully Operational Dual Smooth Steel Drums 78.1" Front and Rear Drum Width 55.1" Drum Diameter Front Vibratory Compaction System Rear Oscillatory Compaction System Two-Stage Vibratory Amplitude – 0.95 mm High / 0.35 mm Low Vibratory Frequency – 40 Hz Low / 50 Hz High Articulated Steering Hydrostatic Drive HAMMTRONIC Electronic Machine Management Open ROPS Operator Station with Overhead Canopy Water Spray System with Front and Rear Drum Scrapers 68.7-Gallon Diesel Fuel Tank 302.5-Gallon Water Tank Maximum Travel Speed – Approximately 6.2 MPH Operating Weight – 28,406 LBS Maximum Operating Weight – 30,203 LBS (Manufacturer Specification) ROPS / OPERATOR PROTECTION This machine is equipped with an open ROPS operator station with overhead canopy. The HAMM manufacturer identification plate confirms the following: ROPS Manufacturer: HAMM AG Applicable Model: HD+ 120i VO Series: H274 ROPS Part 1: 2577598 ROPS Part 2: 2170818 ROPS Serial Number 2: 1100208617 ROPS Manufacture Year: 2023 ROPS Certification Standard: DIN EN ISO 3471:2010 Maximum ROPS Tested Operating Weight: 14,433 kg (Approximately 31,819 LBS) The ROPS identification plate references DIN EN ISO 3449:2009 for FOPS; however, FOPS certification has not been independently verified. The maximum ROPS tested operating weight represents the protective structure's tested capacity and should not be confused with the machine's actual operating weight. APPLICATIONS This machine is designed for asphalt compaction applications, including highway and roadway construction, commercial paving, parking lots, road maintenance, and other asphalt paving projects. The combination of front drum vibration and rear drum oscillation makes this roller particularly suitable for applications requiring effective asphalt compaction with reduced vibration transmission. OWNERSHIP, MAINTENANCE & EQUIPMENT CONDITION This is a ONE-OWNER, LOCAL DEALERSHIP-MAINTAINED machine with 1,055 verified operating hours. According to the seller, the machine has been serviced and maintained by the local dealership throughout its ownership. The seller reports that service and maintenance records are available and will accompany the machine. The seller reports that the machine is fully operational. The machine shows signs of use consistent with its age, operating hours, and application. See photographs and available videos for overall equipment condition, drum surfaces, operator station, and any visible wear or damage. Prospective bidders are encouraged to review all available photographs and videos and schedule an inspection prior to bidding. MANUFACTURER TECHNICAL DATA A manufacturer technical data sheet has been uploaded under the Miscellaneous Log section of this AuctionTime listing. Bidders are encouraged to review this document for additional manufacturer specifications, operating characteristics, compaction capabilities, and equipment information. Manufacturer literature may include standard and optional equipment. The inclusion of an option in manufacturer literature does not establish that the option is installed on this particular machine. IMPORTANT AUCTION INFORMATION This equipment is being sold AS-IS, WHERE-IS, with NO WARRANTIES, expressed or implied. Equipment information and specifications have been obtained from the seller, manufacturer identification plates, and available manufacturer specifications. TMJ Auctions makes no guarantees regarding the accuracy or completeness of the information provided. All prospective bidders are responsible for independently verifying equipment specifications, operating condition, installed options, and suitability for their intended application. Inspections are encouraged and available by appointment only. Buyer is responsible for all transportation arrangements, loading requirements, permits, and compliance with applicable transportation regulations. All sales are final.

Yes

69 gal

303 gal

27,882 lb

2

78 in

55 in

Yes

Yes

35,744 lb

20,908 lb

0.04 in

0.01 in

3,000 vpm

2,400 vpm

41

41

Yes

Open

6.2 mph

1

154 HP

DEUTZ

TCD4.1L4

USA Tier 4 Final

17 ft 5 in

7 ft 1 in

10 ft

28,406 lb