Get Financing
Shipping Estimate
1 - 28 of 110 Listings
Online
On-SiteAll
Serial Number: UNKNOWN
Condition: Used
Description: 810 Header Frame with a Westward 388 10Ft Belt Pickup, for any questions call Jared 605_203_0320
Updated: Thursday, September 17, 2026 06:51 AM
Location: De Smet, South Dakota
Seller: Big 3 Auctions
Cutting Width: 17 ft
Air Reel: Yes
Serial Number: 0326421
Condition: Used
Fore/Aft Reel: Yes
Description: Case IH 1020 Grain Head, 17.5' Cut, Crary Air Reel, Hyd. Fore & Aft, PTO Shafts
Updated: Thursday, September 17, 2026 06:51 AM
Location: Perryopolis, Pennsylvania
Seller: Angelo Equipment, LLC
Serial Number: JJC0323663
Condition: Used
Description: Case-IH 1020 Platform and Head Trailer, 20 foot platform, field tracker, hydraulic fore / aft reel, both drive shafts are included, 3" sickle. Thi...
Updated: Tuesday, September 22, 2026 12:46 PM
Location: Percival, Iowa
Cutting Width: 20 ft
Cutterbar Type: Flex
Serial Number: 004182
Condition: Used
Auto Reel Speed Control: Yes
Poly Skid Shoes: Yes
Description: Case IH 1020 bean head, 20 foot cut, 3 inch sickle sections. INCLUDED is homemade running gear head transport.
Updated: Thursday, September 17, 2026 06:51 AM
Location: Sibley, Iowa
Seller: Klaassen Realty & Auctions
Serial Number: JJC0082345
Condition: Used
Description: 16.5 foot flex cutter bar, 1.5 inch knife, Hydraulic for/aft, Good pans and reel.
Updated: Thursday, September 17, 2026 06:51 AM
Location: Ida Grove, Iowa
Seller: Vetter Equipment - Ida Grove
Cutting Width: 40 ft
Auto Contour: Yes
Serial Number: YCZN17297
Condition: Used
Stock Number: E00656008
Poly Skid Shoes: Yes
Description: AS IS, TRANSPORT, PLASTIC FINGERS, POLY SKIDS, REEL IS STRAIGHT, REEL TEETH ARE IN GOOD CONDITION, NEEDS ABOUT 5 KNIFE GUARDS, DRAPER RIBS ARE VISI...
Updated: Thursday, September 17, 2026 06:51 AM
Location: Wishek, North Dakota
Seller: Titan Machinery - Wishek
Cutting Width: 40 ft
Cutterbar Type: Flex
Serial Number: YBZN15494
Condition: Used
Gathering Type: Draper
Description: 2011 Case IH 2162 40' draper, CNH wide throat hook ups, single point, flip reel, header was on a combine that burnt, some heat damage to plastic an...
Updated: Thursday, September 17, 2026 06:51 AM
Location: Huntington, Indiana
Seller: Ayers Machinery
Cutting Width: 25 ft
Cutterbar Type: Flex
Serial Number: YCZL59523
Condition: Used
Stock Number: BF202627
Gathering Type: Auger
Description: 2012 CASE IH MODEL 3020, 25' FLEX TERRA FLEX CUTTER BAR
HEAD HAS ADAPTOR AND EXTRA SHAFT TO FIX FLAGSHIP OR LEGACY COMBINE
EQUIPPED WITH SCH SICK...
Updated: Thursday, September 17, 2026 06:51 AM
Location: Sutton, Nebraska
Seller: Sutton Irrigation and Repair
Cutting Width: 30 ft
Cutterbar Type: Flex
Serial Number: 1H00630FJB0741478
Condition: Used
Stock Number: 16139
Fore/Aft Reel: Yes
Description: Selling a Functional Header.
30' Width.
Pickup Reel.
Single Point Hookup.
All Equipment sold is an ‘Absolute Sale’.
We take Trades on Auction ...
Updated: Thursday, September 17, 2026 06:51 AM
Location: Phillipsburg, Kansas
Seller: Midwest Equipment Auctions
Cutting Width: 30 ft
Cutterbar Type: Flex
Serial Number: H00630F716635
Condition: Used
Gathering Type: Auger
Description: John Deere 630F 30-foot flex head. Good working condition, field ready. Header trailer not included with the head, but will sell separately. Contac...
Updated: Thursday, September 17, 2026 06:51 AM
Location: Nisland, South Dakota
Seller: Harper Auction Co
Cutting Width: 30 ft
Serial Number: 731649
Condition: Used
Stock Number: 771649
Description: 2009 John Deere 630 platform, 30’ full finger, newer guards and sickle with new spare sickle in holder, always shedded, comes with 32’ Mauer head t...
Updated: Tuesday, September 22, 2026 08:55 PM
Location: Denison, Iowa
Seller: Vetter Equipment - Denison
Cutting Width: 35 ft
Cutterbar Type: Flex
Serial Number: H00635F717027
Condition: Used
Gathering Type: Auger
Description:
Updated: Thursday, September 17, 2026 06:51 AM
Location: Gibsonburg, Ohio
Seller: Haar Brothers
Cutting Width: 45 ft
Cutterbar Type: Flex
Auto Contour: Yes
Serial Number: 1H0745FDTJ0805034
Condition: Used
Fore/Aft Reel: Yes
Description: 2019 John Deere 745FD 45 FT,Flipover Reel,Off Ground Sensors,Belts Like new,Ready To go to the Field,Can Load and/or set up Delivery
Updated: Thursday, September 17, 2026 09:50 AM
Location: Leola, South Dakota
Seller: Spring Creek Equipment & Rental
Cutting Width: 30 ft
Cutterbar Type: Flex
Serial Number: H00930F651787
Condition: Used
Stock Number: 10981CK
Gathering Type: Auger
Description: John Deere 930F 30ft platform. Seller states this unit works as it should. This header comes with 2 extra cutter bars and all new poly for the bott...
Updated: Thursday, September 17, 2026 06:51 AM
Location: Tiffin, Ohio
Seller: WMS Auction Services
Cutting Width: 40 ft
Cutterbar Type: Flex
Auto Contour: Yes
Air Reel: Yes
Serial Number: 1H0RD40FHM0815737
Condition: Used
Description: 2021 John Deere 40ft. platform excellent shape. Low Acres through it, always shed and always service properly. Very nice shape field ready. Good si...
Updated: Thursday, September 17, 2026 07:30 PM
Location: Leland, Illinois
Seller: Almburg Equipment Auctions
Cutting Width: 35 ft
Serial Number: 165737
Condition: Used
Description: 2004 MacDon 974 35' Draper, Auger Pump Seal, Fits non latteral Gleaner Combines, Fore and Aft
Comes with Unverferth UT36 head cart
Updated: Thursday, September 17, 2026 06:51 AM
Location: Cullom, Illinois
Seller: Rediger Auction Service
Cutting Width: 45 ft
Auto Contour: Yes
Serial Number: 278676-15
Condition: Used
Stock Number: E00642588
Poly Skid Shoes: Yes
Description: As Is, CaseIH AFX Adapter, No Transport, Auto Contour, Telescoping Drive, Needs New Sickles, Small Hole in LH Draper, Three Center Drum Fingers Mis...
Updated: Thursday, September 17, 2026 06:51 AM
Location: Wishek, North Dakota
Seller: Titan Machinery - Wishek
Serial Number: 325805-18
Condition: Used
Stock Number: TR0890
Description: * Mac Don FD75 Flex Draper
* JD S-series adaptor
* Double knife
* Double finger reel
* Height sensors
* In cab switch
* 45' wide
* John Deer...
Updated: Thursday, September 24, 2026 02:29 PM
Location: Tower City, North Dakota
Seller: NorthStar Ag
Serial Number: 325802-18
Condition: Used
Stock Number: TR0889
Description: * Mac Don FD75 Flex Draper
* JD S-series adaptor
* Double knif
* Double finger reel
* Height sensors, in cab switch
* 45' wide
* John Deere o...
Updated: Thursday, September 24, 2026 02:29 PM
Location: Tower City, North Dakota
Seller: NorthStar Ag
Cutting Width: 16 ft
Cutterbar Type: Rigid
Serial Number: PIX180032
Condition: Used
Stock Number: SBA1288
Description: Pixall 1800 VPC II 16' Hydraulic Bean Header with Stainless Steel Adjustable Concave, Constant Angle Plant Aligners, and Stationary Reel. Asking $3...
Updated: Thursday, September 17, 2026 06:51 AM
Location: Green River, Utah
Seller: SellBuyAuction
Cutting Width: 45 ft
Cutterbar Type: Flex
Serial Number: 1H0745FDKK0805264
Condition: Used
Stock Number: 8997
Gathering Type: Draper
Description: 2019 John Deere 745FD, 45FT Wide, Draper, Single Point Connection, Newer Paddle Reel Fingers, Spare Knife, Good Poly, S/N: 1H0745FDKK0805264, To Vi...
Updated: Monday, September 14, 2026 10:03 AM
Location: Oakes, North Dakota
Seller: Ulmer Auction Service
Cutting Width: 20 ft
Cutterbar Type: Rigid
Serial Number: 543286
Condition: Used
Gathering Type: Auger
Reel Type: Pick Up
Description: JOHN DEERE PLATFORM
-20 Feet width
--Located on the farm near Gilead, NE for your viewing and inspection. This is part of a farmer retirement li...
Updated: Wednesday, September 16, 2026 02:02 PM
Location: Hebron, Nebraska
Seller: Elting Auction Co.
Cutting Width: 20 ft
Cutterbar Type: Flex
Serial Number: 001214
Condition: Used
Stock Number: 46601
Gathering Type: Auger
Description: Case IH 1020 Bean Head-Flex head, pto drive, poly finger reel, CART DOES NOT SELL Quantity: 1
Updated: Wednesday, September 23, 2026 05:14 PM
Location: Greenville, Ohio
Seller: Bussey Bros Auctioneers
Cutting Width: 30 ft
Cutterbar Type: Flex
Serial Number: 1H0630FDEE0765249
Condition: Used
Stock Number: 46534
Poly Skid Shoes: Yes
Description: 2014 John Deere 630FD Flex Draper-30ft head, poly plates, poly finger reel, New belt for new right side belt sells with head. ***Head sells seperat...
Updated: Wednesday, September 23, 2026 05:14 PM
Location: Greenville, Ohio
Seller: Bussey Bros Auctioneers
Cutting Width: 40 ft
Cutterbar Type: Rigid
Serial Number: 1H0HD40RCR0830111
Condition: Used
Stock Number: 46700
Poly Skid Shoes: Yes
Description: 2024 John Deere HD40R Draper Head, hinged platform, single point hookup, adjustable reel, LED lights, SN#1H0HD40RCR0830111 ***CART DOES NOT SELL WI...
Updated: Wednesday, September 23, 2026 05:13 PM
Location: Greenville, Ohio
Seller: Bussey Bros Auctioneers
Cutterbar Type: Flex
Serial Number: 2042416F
Condition: Used
Stock Number: 26
Description: AGCO 500 | Serial #2042416F
For additional information please contact Ron Hirt: 785-448-9010.
20' flex head
Header trailer
6T P&K
Straight a...
Updated: Tuesday, September 22, 2026 08:16 AM
Location: Westphalia, Kansas
Seller: Flory & Associates Realty & Auctions
Condition: Used
Stock Number: 261335
Description: CASE IH 1020 BEAN PLATFORM, . Quantity: 1
Updated: Tuesday, September 22, 2026 03:07 PM
Location: Wyanett, Illinois
Seller: Rediger Auction Service
Condition: Used
Stock Number: 261279
Description: CASE IH 1020 BEAN PLATFORM, . Quantity: 1
Updated: Tuesday, September 22, 2026 03:07 PM
Location: Wyanett, Illinois
Seller: Rediger Auction Service