Get Financing
Shipping Estimate
1 - 28 of 47 Listings
Online
On-SiteAll
Working Width: 10 ft
Serial Number: 902265
Condition: Used
Number of Shanks: 5
Field Ready: Yes
Mounting Type: Pull-Type
Description: DMI Tiger-Two Ripper, front cutting blades,10ft width, 30 in spacing, 5 shank ripper, like new 16.5L-16.1 SL tires, 24in front rolling blades, 32 i...
Updated: Wednesday, May 13, 2026 12:42 PM
Location: Osborne, Kansas
Seller: Double D Auctions
Serial Number: CALL
Condition: Used
Description: DMI tiger II ripper
5 shank
one row of danish tines
rear leveling drag
good shanks
Updated: Wednesday, May 13, 2026 12:42 PM
Location: Gibsonburg, Ohio
Seller: Haar Brothers
Working Width: 15 ft
Serial Number: JFH0015564
Condition: Used
Number of Shanks: 7
Shank Spacing: 30 in
Shank Type: Straight
Description: Ready to go to the field. Call John if you have questions
Updated: Wednesday, May 06, 2026 12:50 PM
Location: Montezuma, Iowa
Seller: Monte Tractor Repair and Equipment Sales LLC
Serial Number: CALL
Condition: Used
Description: DMI 2500 ripper
5 shank
3 point
comes with extra parts shown in the picture
shank offsets to run through corn stalks
come with no till sh...
Updated: Wednesday, May 06, 2026 12:46 PM
Location: Gibsonburg, Ohio
Seller: Haar Brothers
Working Width: 17 ft 6 in
Serial Number: UNKNOWN
Condition: Used
Frame Type: 1-Section
Ripper Type: In-Line Ripper
Description: DMI 7 shank ripper. Frame is 17'6" wide. There are 2 folding wings that will narrow the frame down to 14'5" if needed. Ripper shanks are 36" long. ...
Updated: Wednesday, May 06, 2026 12:42 PM
Location: Rich Hill, Missouri
Seller: Hoobler Auctions
Working Width: 11 ft 6 in
Serial Number: 120090
Condition: Used
Stock Number: A3909 L
Number of Shanks: 5
Shank Spacing: 27 in
Description: DMI Ecolo-Tiger 527 Ripper that has a McFarlane spike tooth harrow and leveling discs. The unit has always been shedded and is in good condition. I...
Updated: Wednesday, April 29, 2026 01:22 PM
Location: Manchester, Iowa
Seller: Old 20 Auctions
Serial Number: UNKNOWN
Condition: Used
Stock Number: DMI RIPPR(RL)
Ripper Type: In-Line Ripper
Description: DMI 5 SHANK RIPPER. Good usable condition. We encourage personal inspection. See Terms and Conditions Prior To Bidding- This Item Is Being Sold As/...
Updated: Wednesday, April 01, 2026 01:51 PM
Location: Flemingsburg, Kentucky
Working Width: 12 ft
Serial Number: 601047
Condition: Used
Stock Number: 2 5 - Shank Ripper
Number of Shanks: 5
Operating Condition: Operable
Description: DMI Tiger 2, 5-shank ripper from the estate of Phil Guy. Front blade gang and rear tines. Pull-type, good condition. Located at KDK Sales in Washin...
Updated: Wednesday, March 25, 2026 03:07 PM
Location: Washington, Iowa
Seller: KDK Sales & Equipment LLC
Serial Number: 120241
Condition: Used
Rear Attachment: Yes
Rear Attachment Type: Spike / Drag
Frame Type: 1-Section
Ripper Type: In-Line Ripper
Description: Coming off the farm retirement
5 shank
1 bat drag on the back
Tires good
Discs good
Bearings good
Really nice shape
Updated: Wednesday, March 04, 2026 12:22 PM
Location: Harrisburg, Illinois
Seller: Rann Auctions
Serial Number: 621721
Condition: Used
Description: 3pt,
5 shank deep till,
spring reset,
front gauge wheels,
light kit,
rear leveler,
in line ripper,
front coulter.
Updated: Wednesday, February 11, 2026 11:33 AM
Location: Pound, Wisconsin
Seller: Dan Bieber Equipment
Serial Number: UNKOWN
Condition: Used
Description: DMI Tiger Two 5 Shank Ripper. The unit is designed for deep tillage operations and includes a hydraulic lift system for added versatility. The ripp...
Updated: Wednesday, January 28, 2026 12:59 PM
Location: Decker, Indiana
Seller: William Wilson Auction and Realty, Inc.
Serial Number: UNKNOWN
Condition: Used
Stock Number: DMI 3 SHANK(T)
Description: DMI 3 SHANK RIPPER. We encourage personal inspection. See Terms and Conditions Prior To Bidding- This Item Is Being Sold As/ Is- Where/ Is To The H...
Updated: Monday, December 29, 2025 02:32 PM
Location: Flemingsburg, Kentucky
Serial Number: 0000001
Condition: Used
Description: Just consigned from a local reputable farmer is a good Dmi 9 shank ripper, 9" ripper points, rear leveling bar with hydraulic adjust.
Please call ...
Updated: Monday, December 29, 2025 02:29 PM
Location: Parnell, Iowa
Seller: Charlie & Associates LLC
Working Width: 8 ft
Serial Number: 13727
Condition: Used
Frame Type: 1-Section
Ripper Type: In-Line Ripper
Description: DMI 3 Shank Ripper
Call Randy 402.841.2141
Part of the Randy Alexander Retirement Auction
Updated: Wednesday, December 17, 2025 03:12 PM
Location: Plainview, Nebraska
Seller: Aschoff Auction
Serial Number: 220419
Condition: Used
Stock Number: 65595
Description: 5 Shank, Hydraulic Disc Leveler, Rear Sweeps, 22" Disc, 16.5Lx16.1 SL Tires
Updated: Wednesday, December 17, 2025 03:12 PM
Location: Huntingburg, Indiana
Seller: Hopf Equipment
Serial Number: JFH0002520
Condition: Used
Description: DISC-RIPPER 17.5 WOKING WIDTH 7 MAIN SHANKS
Updated: Wednesday, December 17, 2025 03:08 PM
Location: Moses Lake, Washington
Seller: JBS Auctions
Working Width: 15 ft
Serial Number: UNKNOWN
Condition: Used
Number of Shanks: 7
Shank Spacing: 30 in
Shank Type: Parabolic Spring Reset
Description: DMI Tiger-Two 730 Disc Ripper – 7 Shanks on 30” Spacing
Good solid DMI deep-tillage ripper. Seller has owned this unit for approximately 20 years ...
Updated: Wednesday, December 03, 2025 01:16 PM
Location: Grinnell, Iowa
Seller: J5 Sales & Auctions
Serial Number: 4321
Condition: Used
Stock Number: 355962
Description: Disk Ripper, Hydraulic Leveling, Spring Reset, 2 Tires, 3 Section Fold
Updated: Wednesday, November 19, 2025 12:11 PM
Location: Elnora, Indiana
Seller: Hutson
Serial Number: UNKNOWN
Condition: Used
Stock Number: DMI RIPPER
Ripper Type: In-Line Ripper
Description: DMI TIGER RIPPER. Good usable condition. We encourage personal inspection. See Terms and Conditions Prior To Bidding- This Item Is Being Sold As/ I...
Updated: Wednesday, October 29, 2025 12:27 PM
Location: Flemingsburg, Kentucky
Serial Number: 1234
Condition: Used
Stock Number: L545
Number of Shanks: 5
Front Blades: Yes
Frame Type: 1-Section
Description: Local Trade In, Coulter Champ II 5 Shank Ripper, Ready for Work! Wear Points and Tires are in Good Shape, Selling As-Is and Absolute, Viewing is En...
Updated: Wednesday, October 22, 2025 11:50 AM
Location: Coleman, Wisconsin
Seller: Beaver Machine Inc.
Working Width: 17 ft
Serial Number: 622914
Condition: Used
Number of Shanks: 7
Shank Spacing: 30 in
Shank Type: Auto Spring Reset
Description: DMI TIGER SHANK 7 RIPPER, 7 Shank, 30" spacing, 10" Tiger Points. Hyd. fold disc gangs. 16.5L-16SL tires. Includes: 3 new 10" Tiger Points, 2 ...
Updated: Wednesday, October 08, 2025 12:11 PM
Location: De Pere, Wisconsin
Working Width: 17 ft 6 in
Serial Number: UNKNOWN
Condition: Used
Number of Shanks: 7
Operating Condition: Operable
Field Ready: Yes
Description: DMI Tiger II 7 shank Ripper. New blades in 2023, newer tires, Heavy Duty Gates 4 row Large coil tine mounted drag for good leveling in the field. m...
Updated: Wednesday, September 24, 2025 12:56 PM
Location: Malta, Illinois
Seller: Almburg Equipment Auctions
Serial Number: 723496
Condition: Used
Description: DMI Ecolo Tiger 730B 7 shank disk ripper. Auto reset shanks, DMI leveler, good tires, lights. Has a couple of chipped blades but they all have so...
Updated: Wednesday, September 17, 2025 12:44 PM
Location: Frankfort, Indiana
Seller: Scott Batts Auctioneering
Working Width: 13 ft
Serial Number: UNKNOWN210
Condition: Used
Stock Number: 26
Number of Shanks: 5
Shank Spacing: 30 in
Description: DMI Ripper:
- 5 shank ripper in good condition
- 19 inch blades
- 30 inch spacing
- new tires
Updated: Wednesday, September 03, 2025 12:13 PM
Location: Forest, Ohio
Seller: Chad Gottfried Auctioneer
Serial Number: UNKNOWN
Condition: Used
Description: DMI Model 1300. 6 Ripper points. 5 Chisel points. S-tine leveler. 11 shank on 15” centers.
Updated: Wednesday, September 03, 2025 12:13 PM
Location: Osage, Iowa
Seller: Leid View Tractors
Working Width: 17 ft 6 in
Serial Number: 724766
Condition: Used
Number of Shanks: 7
Shank Spacing: 30 in
Operating Condition: Operable
Description: DMI Eco tiger 730 B Ripper wing fold outside discs, six lead shanks, seven ripper shanks winged with shin-guards comes with a bucket full of extra ...
Updated: Wednesday, August 20, 2025 11:55 AM
Location: Malta, Illinois
Seller: Almburg Equipment Auctions
Working Width: 15 ft
Serial Number: UNKNOWN
Condition: Used
Number of Shanks: 11
Mounting Type: Pull-Type
Front Blade Size: 22 in
Description: DMI Coulter Champ, Disc Chisel, 15 ft, 22" Blades, 15 Shanks, Pull Type, 12.5L-15 Tires, Pin Hitch,
NOTE: 5 New Shanks & 3 Chisel Tips,
For Quest...
Updated: Wednesday, August 20, 2025 11:51 AM
Location: Avoca, Iowa
Serial Number: 220592
Condition: Used
Stock Number: 85641
Description: S/N: 220698
NOT TITLED PER STATE REGULATIONS
FULL OPERATIONS NOT TESTED.
5-Shank Disk Ripper
2) Set of Disk Gangs
Rear Leveler
Hydraulic...
Updated: Friday, August 08, 2025 11:32 AM
Location: Boone, Iowa
Seller: Housby